CSM-VD Air Classifying Mill

The materials are evenly sent into the crushing chamber by the feeding system, and are strongly impacted by the high-speed rotating crushing disc. At the same time, they are impacted by the centrifugal force, collide with the crushing gear ring, and are subjected to a variety of comprehensive forces such as shear, friction and collision, so that the materials are crushed. The crushed materials move to the classification area with the air flow, and the coarse and fine materials are separated by the classification wheel with frequency conversion adjustment, The products meeting the fineness requirements enter the cyclone collector and dust collector with the air flow for collection, and the coarse particles return to the crushing area for further crushing.

Inquire Now marketing@alpapowder.com

Product Description

Performance characteristics

Available D50:2～45μm.
Classifying wheel is Vertical installation.
Two-In-One shaft of grinding disc and classifier wheel, compact structure.
Especially suitable for ultra-fine grinding in pharmaceutical, food and chemical industries.
Small floor space. seamless and smooth design, easy disassembling and cleaning.
Lower energy consumption, wide application, high cost-performance.
Key parts like hammer, gear ring and classifying wheel are made of wear-resistant material, and also ceramic ensuring non-contact with metal throughout the grinding for high purity of the final product.
Grinding is in closed system, low dust and noise, clean and environmentally friendly.
PLC control system, easy operation.
Low noise design.
The motor can be connected with belt to increase rotating speed.
Can be used in series with multi-stage classifiers to produce multiple sizes.
Optional explosion-proof design, meet the ultra-fine grinding processing requirements of flammable and explosive oxide materials.
High-temperature, low-temperature, normal-temperature, airtight cycle, Inert gas cycle designs are available, for different grinding requirements of different materials.

Working principle

The material is evenly fed into the grinding chamber by the feeding system, strongly impacted by the high-speed rotating grinding disc. At the same time, it is subjected to centrifugal force and collides with the grinding ring gear, and is subjected to various comprehensive forces such as shearing, friction and collision to finished grinding. The grinded material moves to the classifying zone with the airflow. The classifier is adjusted by frequency conversion, separates the coarse and fine materials, the product that meet the fineness requirement enters the cyclone collector and the dust collector with the airflow, and the coarse powders return to the classifying zone, secondary grinding.

Technical parameter

Technical Parameters

Parameter		CSM-280VD	CSM-350VD	CSM-510VD	CSM-710VD	CSM-1100VD	CSM-1250VD
Power (kW)	Grinding Disc	7.5	11~15	22~30	45~55	90~110	132~160
	Classifier Impeller	1.5	2.2	4~5.5	7.5~11	15	18.5~22
	Feeder	0.55~1.1
Rotate Speed(r/min)	Grinding Disc	7500	6200	4200	2800	2100	1700
	Classifier Impeller	500~4500	500~4000	400~3000	300~2500	250~2000	200~1600
	Feeder	20~100
Max Air Flow(m³/h)		700	900	3000	5400	10000	15000
Product Size(μm)		5~300			10~300
Production Capacity(kg/h)		2~100	10~400	15~600	30~1200	60~1500	300~3000

Note: The production capacity is closely related to the particle size, specific gravity, hardness, moisture and other indicators of the raw materials. The above is only for selection reference.